Call Now On: +44 1977 681 910
  Have questions? Call now +44 1977 681 910
  Need help? Contact us via email

Water and waste water components – non metallic range

Visit also

Precision laser cutting and fabrication service

Water and waste water components – non metallic range

Typical applications
Three Shaft Rectangular Clarifiers removing bottom sludge only. Typical in water treatment plants and or combined with inclined plate or tube settler applications. Four Shaft Rectangular Clarifiers removing bottom sludge to a sludge hopper at the influent end of the clarifier combined with skimming floating surface scum discharging via a scum pipe.

DAF tanks
Dissolved Air Flotation with two separate systems ‘Top & bottom’ for sludge removal and surface skimming of floating scum up an inclined beaching plate.

Grit bucket collectors
Typically five shaft collectors for grit removal with pivoting nonmetallic buckets to elevate and discharge via a chute.

CSB spacer block

CSB spacer block

Specifically for use with SCF and HSF channel flights the unit acts as a spacer between chain attachment paddles and C section flight. Hole positions to cover both F2 and F22 styles. Generally cast from Acetal co-polymer material.

  1. CLR return shoe
    From UHMW-PE for standard rectangular systems (Also available in heat treated iron to be used in conjunction with metallic chain).
  2. CCS carrying shoe
    for low friction contact on conveying strand wearstrip.

CLR and CCS shoe material options
• UHMW Polyethylene
• Polyurethane
• Cast Nylon
• Polypropylene
• Cast Iron

From UHMW polyethylene 3/8” (10 mm) to 3/4” (20 mm) thick at widths as required by application.

Send Message to JOHN KING CHAINS

Switch The Language